Friday, October 23, 2020

 I left a little after sunrise this morning to try to time it so I enter Virginia at 9 am when the curfew gets over.  Had several areas of bumper to bumper traffic going around Baltimore and on the north side of Washington DC.  I entered Virginia at 9:08.  Had a few more areas of bumper to bumper traffic between DC and Richmond.  After that traffic remained pretty heavy all day.  Stopped for the night at the Petro in Florence, South Carolina.  

Thought you might be wondering what the difference is with the new "D" rings.  Even if you weren't, here is the difference anyway.  

This is what it looks like securing the machine without the new "D" rings I had installed yesterday.

Here it is using the new ones.  Much better!!

Thursday, October 22, 2020

 I left Baltimore well before sunrise this morning and drove up to Carlisle, PA.  They brought my trailer in right away and started working on it.  The truck shop brought my truck in and started right away too.  They replaced the bad air tank on the trailer.  They also did some welding and added 4 more "D" rings for me.

This afternoon when everything was finished, I drove back to the Daily terminal in Baltimore.  I reloaded the excavator and secured it using my new "D" rings.  I stayed there for the night.  Have to wait a bit in the morning because I can't go into Virginia until after 9 am.

Wednesday, October 21, 2020

 Was up at 2 am and on the road at 2:30.  Misty rain and patchy fog, heavy at times, for a good part of the drive down to the Port of Baltimore.  When they opened, I checked in, then went and picked up my machine.  Loaded a Caterpillar 320 Excavator that is going to Miami, Florida.

Everything was going good.  I made great time in the Port.  Then I went to leave.  That's when things took a turn for the worse.  My permit route takes me straight out the gate, straight through the traffic light, then up and over a set of railroad tracks.  They have routed all of us that way for several years.  Well, this time I didn't make it.  I bottomed out and was stuck on the tracks. I called the cops right away.  I also called our maintenance shop and had them send a wrecker.    While they were on the way, I did my best to get unstuck.  I tried several things none of which worked.  I quickly discovered that I also had a mechanical problem with both the truck and trailer.  The trailer was not getting any air and neither was the airbags on the truck.  I also had a leak in one of the air tanks on the trailer.

Lots of cops showed up, four Maryland Transportation Police, one Baltimore County Police, and one Railroad Police.  Two different wrecker companies arrived with a total of four trucks.

When all attempts to get air to the bags didn't work, two of the large wreckers got on either side of me.  Each ran a cable to the trailer.  Then they pulled me in tandem across the tracks and got me unstuck.  Sounds easier than it was.  We then went down the road to a wider area to try to get air to the bags on both the truck and trailer.  There was a huge back up of oversized vehicles waiting to go into the Port and to get out of the Port.  I created quite a mess.  This is the ground clearance I had.

The wrecker guys were able to bypass the air tank to get air to the rest of the trailer in order to raise the trailer airbags.  Meanwhile, I found out that I had a bad switch in the truck that would not put air in the truck airbags.  After switching it on and off about 50 times it finally worked and the bags filled as they should.  Here is the trailer air tank before they bypassed the tank.

Here it is after the bypass.  So simple, but it worked.

Now I had enough ground clearance to get out of there.

I went to the Daily yard in Baltimore.  The folks in Carlisle decided that I should unload the excavator and leave it there.  Then drive up to Carlisle to get everything fixed.  By the time I got the excavator unloaded and parked out of the way, I didn't have enough hours to get to Carlisle today.  I went over to the TA truck stop in Baltimore for the night.  I'll leave early enough in the morning to get there when they get there for work.

Tuesday, October 20, 2020

 Got up early this morning to replace a headlight bulb that had gone out. Shortly after that little task was completed my pole car arrived.  He got his car set up while I finished my pre-trip inspection.  We left at sunrise.  Had a very uneventful trip.  I was worried that I was going to miss the fall colors this year but I was very happy to see that I didn't.  Lots of great autumn colors still left to see. Unfortunately, the weather didn't cooperate to give me optimum viewing.  It was very cloudy and heavily overcast all day with rain in New York.  We drove all the way to Syracuse and delivered the wheel loader.  Went from there to the TA truck stop in Binghamton, New York for the night.  Next load is tomorrow morning at the Port of Baltimore.  I'll leave here real early in the morning.

Monday, October 19, 2020

My Virginia permit finally arrived shortly before noon.  I left and drove north.  Had some episodes of bumper to bumper traffic before Washington DC and after.  Considering where I was, it wasn't bad at all.  Drove to the TA truck stop in Greencastle, Pennsylvania.  My pole car will meet me here in the morning.  Have to have one in PA and NY.

Saturday, October 17, 2020

 After looking more closely at my North Carolina permit this morning I saw that I needed an escort car in North Carolina.  OOPPPSSS !!!  Since I was already about halfway through NC I decided that I would chance it and go.  There was only one scale house between where I was and the State line and most scales are closed on the weekends.  So I left at sunrise.  Made it with no problems to the Virginia line.  Stopped at the Love's truck stop is Skippers, Virginia.  I'll wait here until my Virginia permit arrives.  

Friday, October 16, 2020

 I had my last treatment yesterday!!!!

Today I drove up to the Port of Savannah and loaded a Caterpillar 982 Wheel Loader that is going up to Syracuse, New York.

Left there and drove to a crummy truck stop in Wade, North Carolina for the night. I have all my permits EXCEPT Virginia.  Won't be going very far tomorrow.  Feel very good to be moving again !!!!

Monday, October 12, 2020

 After a difficult weekend recovering from Friday, and after my daily treatment, I drove down to Ocala, Florida with a large generator.

I was there a little early.  When the crane arrived it took them an hour to get set up.

Finally got unloaded.  Then drove back to the Daily yard in Jacksonville.

Friday, October 9, 2020

Eric Trump was speaking at the business next to ours today at 11:30.  Right when I'm getting my treatment. Oh well.  Lots of activity over there.  Hanging from the cranes were American Flags, Trump Flags, and Florida Gator Flags.  Go Gators !!!!!!!!!!!!!

After my treatment today I went over to Orange Park, Florida, and loaded 8 generators that are going over to Alabama to the hurricane destruction areas.  

After securing them I drove back to the Daily yard.  Another truck that brought a generator is going to take these to Alabama.  I am going to deliver his generator in Ocala, Florida on Monday. I took off all my securement stuff from the 8 generators.  While the other driver took off his securement from the generator.  Then I secured the big generator with my stuff.  When we were both finished we swapped trailers.  Monday after my treatment I'll go deliver it.  No hurry, the crane won't be there until 1 pm.

Tuesday, September 22, 2020

 This morning went to the Port of Jacksonville and loaded a Caterpillar D4 Dozer and Blade that is going to Albany, Georgia.  

Left there and went back to the Daily yard.  Went, in my car, for my treatment.  When that was done I left for Albany.  Drove to Albany and delivered the dozer.  Stopped for the night at the Pilot truck stop in Albany, Georgia.

Tuesday, September 15, 2020

 Got the check engine light fixed yesterday.  Today took a large Caterpillar generator from our yard in Jacksonville down to Ring Power Caterpillar in Saint Augustine, Florida.  I forgot to take photos of it.  Then back to the Daily yard.  Have exactly one month of treatments to go.  They are starting to take their toll on me. I'll be glad when they are done.

Wednesday, September 9, 2020

 Got another local load today.  Went down to Alachua, Florida to a very good customer of Daily's, Sandvik, and loaded a Hyster 360 Forklift that was going 9 miles down the road to a quarry.  It weighed 45,000 pounds and was 15 feet high - legal height is 13 feet 6 inches.

Once my pole car arrived we left.  Through most of the route, there were tree canopies covering the road.  Spent most of the trip dodging tree branches and limbs.  We made it there with no problems and I delivered the forklift.  Then drove back to Jacksonville.  More daily radiation treatments for me still so I can't wander far.  On my way this morning my "Check Engine" light came on.  I'll have to address that tomorrow.

Saturday, August 29, 2020

 Left about 1:30 am and drove back to Jacksonville.  Settling in for the rest of the weekend.

Friday, August 28, 2020

 Got a nice little local run today.  Loaded a Caterpillar 299D Skid Steer going from Jacksonville, FL to Youngstown, Florida.  

It has been a very long time since I had driven one of these.  Forgot how much fun they are.  I delivered the machine a little after lunch.  Decided not to go back today.  Didn't want to get to Jacksonville at rush hour.  I stopped at the TA truck stop in Marianna, Florida.  When my 10 hours are up I'll head back.  Not as much traffic to deal with then.

Wednesday, August 26, 2020

 A couple of Daily trucks are returning this train back to Walt Disney World.  They stopped in the Jacksonville terminal for the night.  When transporting stuff like this for Disney, they require that they park in secure facilities for the night. Notice that there are no identifying markings on them.  That is not by accident.  Disney is very strict about that stuff.

Tuesday, August 25, 2020

 As soon as my 10 hours was up I left.  Drove straight home to the Daily yard in Jacksonville, Florida.  Will be here for a little while.  My treatments start this week.  Will be every day for about two months.

Monday, August 24, 2020

 Sorry I didn't update over the weekend but things were in a bit of a turmoil.  So here are the updates.

I slept most of the rest of the day Friday.  I woke up at midnight, Saturday morning, and my headache was gone!!  I got started finishing swapping all my crap over to the blue truck.  When I finished I took the silver truck to the truck wash and got it cleaned up.  When I got back to the Daily yard I drove around the parking lot looking for my trailer.  It wasn't there.  I peered in the bay windows of the shop and low and behold, there it was.  So I was stuck there for the weekend.  Since all I did was pile everything into the truck, I couldn't even see my bed.  I went and got a hotel for the weekend.  

Monday morning came and I checked out and went back to the Daily yard.  The shop said that they had a lot of work to do on the trailer and it might be ready late in the afternoon.  I settled in for the long wait.  While waiting I managed to dig my way down to my bed.  Got enough stuff out of the way so that I can use it.  I won't be able to get it totally straightened out until I get home and can take some of the stuff out.  It's amazing how much stuff accumulates in 3 or 4 years.

At 3 pm they pulled out my trailer.  It was done.  They had changed all the brakes, replaced several wheel seals, several "S" cams, and several tires.  They re-welded a couple cracks.  They also did a 90 day inspection, and general servicing to the trailer which includes greasing the chassis.  

I hooked up to it and prepared to go.  I pulled out of there at 3:30.  I wanted to avoid Washington DC because I would get there right at rush hour.  I went the back way down I-81.  Was going to go through Charlotte but remembered that the Republican Convention was going on there so going through was probably not a good idea.  I went the back way to Richmond to I-95.  That was a good idea.  Had no traffic issues at all.  Stopped for the night at the Petro truck stop in Kenly, North Carolina.  470 miles today.  Will get home tomorrow.

Friday, August 21, 2020

 First thing this morning took the blue truck over to Thermo King.  The APU was doing the same thing as the silver truck.  Apparently, there was a recall on them for that issue.  While waiting for the truck, I developed a headache that continued to get worse.  When they finished, I took it back to the Daily yard.  By this time I was in no shape to continue swapping my stuff.  I laid down and slept.  Didn't help much.  Needless to say, I didn't get anything done today.

Thursday, August 20, 2020

 As soon as my 10 hours were up I left and continued the rest of the way to Carlisle.  Once I got to the Daily yard in Carlisle I got the keys to the truck I was swapping into and got started moving my stuff into it.  

After driving 484 miles today and moving a bunch of stuff into the new truck, I ran out of steam.  I'll get up early tomorrow and get started after I've had some sleep.

Wednesday, August 19, 2020

 Last night my APU did the same thing I thought I had fixed.  So this morning I went back to Thermo King.  He checked it all out again and fixed.  I left there and started toward Carlisle, PA.  While cruising down the highway my right front tire blew.  That was a bit of a pucker factor. 

Pulled over and got road service to come out and change it.

After that was finished I went over to the Flying J truck stop in Beaverdam, Ohio for the night.